Got a fairing scoop that one of the plastic mounts the screw threads into [screw holding scoop to duct- there are 3 of them] is cracked and half of the mount is ready to fall off. I would like to repair this with some kind of bonding epoxy? Then put some in the mount hole before i thread the screw back in to lock it together. I assume it is ABS like everything else. I also have several fairing cracks PO put in, and need to cut out a channel and repair the same way so I don't mind spending some money on product if i can use it for that also.
Hi! Check "side cover fix" in maintenance section. I ran across it searching on a similar issue.
Chris
Did a search for "side cover fix" in the maintenance section and only your post came up.
Hi...here's the link:
http://www.fjowners.com/index.php?topic=11699.0 (http://www.fjowners.com/index.php?topic=11699.0)
Chris
Chris- thanx a bunch. Sometimes i just need to led by the hand and shown.
Yea, me too! Hope it helped! Let me know if you give the abs goo a go and what kind of result you get!
Chris