FJowners.com

General Category => Maintenance => Topic started by: xenotron on May 27, 2014, 12:46:35 PM

Title: Fuel filler cap ball bearing
Post by: xenotron on May 27, 2014, 12:46:35 PM
Hi Guys, I have just taken the fuel cap apart to remove the salmon coloured flaps that make the tank whistle. This seems to have solved the issue  :good2:  The trouble is a very small spring and ball bearing came out but I did not see where it came from and cant see any place obvious to put it back. It seems to lock and unlock ok but I am sure those parts are there for a reason. Does anyone know what part of the cap they fit?

Thanks John
Title: Re: Fuel filler cap ball bearing
Post by: movenon on May 27, 2014, 02:13:18 PM
Quote from: xenotron on May 27, 2014, 12:46:35 PM
Hi Guys, I have just taken the fuel cap apart to remove the salmon coloured flaps that make the tank whistle. This seems to have solved the issue  :good2:  The trouble is a very small spring and ball bearing came out but I did not see where it came from and cant see any place obvious to put it back. It seems to lock and unlock ok but I am sure those parts are there for a reason. Does anyone know what part of the cap they fit?

Thanks John

Hi John, go to this link and open the PDF file in the first post. Then scroll down to the 3 rd and 4th photo.  Hope this helps out.

http://www.fjowners.com/index.php?topic=2024.0 (http://www.fjowners.com/index.php?topic=2024.0)

George
Title: Re: Fuel filler cap ball bearing
Post by: xenotron on May 27, 2014, 02:19:53 PM
Thanks for that George, now I can see where it goes.  :good2: only a couple of small jobs to do now and it will be on the road  :yahoo: