Hey all
Can someone tell me how to remove the pin out of the bottom mount on the 84 fj . I to remove it to fit the F4 shock and if anyone can give me the need; bearing numbers and seal numbers
Thanks Chiz
Quote from: chiz on March 08, 2014, 02:37:47 PM
Hey all
Can someone tell me how to remove the pin out of the bottom mount on the 84 fj . I have to remove it to fit the F4 shock and if anyone can give me the need; bearing numbers and seal numbers
Thanks Chiz
Ok it is removed my eyes are bad close up cant see a dam without my jewelers gizmo still need an answer on the needle rollers and seals for the bottom shock mount.... or am I confusing this with something else???
Thanks Chiz
Yes, you are confused.
The '84/85 FJs used bushings in the swing arm linkage. In '86 Yamaha converted over to needle bearings, a better solution.
This has nothing to do with your shock. This is the linkage to your swing arm.
If you want to do this, you can look up the part #s by going to this site and looking up the '86 FJ info.
http://www.partzilla.com/parts/search/Yamaha/Motorcycle/parts.html (http://www.partzilla.com/parts/search/Yamaha/Motorcycle/parts.html)
I found this in the files section I think its what I'm looking for
http://www.fjowners.com/index.php?topic=10870.0 (http://www.fjowners.com/index.php?topic=10870.0)
Hey Chiz
I went to Canadian bearing in Hamilton last week for needle bearings for my f4i shock mod and they dont have them and cant get them.
S-I-E
what are you going to do make a bush or something???
Im going to look for other local bearing suppliers and if that doesnt work buy some online.
Not sure this will help but this is what I used when I did the F4i conversion to fit the 12mm bolt. (1990FJ)
I had to "machine" open the eye slightly with a dowel and some emery cloth.
http://www.fjowners.com/index.php?action=gallery;sa=view;id=4531 (http://www.fjowners.com/index.php?action=gallery;sa=view;id=4531)
George
Great bunch of pictures thanks