Anyone how remember the what torque to set on the Spin On adapter? Lost the instruction that came with it, and using the search function from my phone is not an option :shok:
By the way, how often do you guys change your airfilters? Has the pods same interval as stock filter?
Cheers
Ken
I have always done this: Use a finger of engine oil on the gasket and twist on the filter until the gasket makes contact. Then turn 3/4 of a revolution more. You're done! I clean and oil my air filter (UNI pods) every oil change.
Quote from: keand3 on September 22, 2013, 03:30:24 AMAnyone how remember the what torque to set on the Spin On adapter? Lost the instruction that came with it, and using the search function from my phone is not an option :shok:
Cheers
Ken
Ken,
http://user.xmission.com/~red/torque.jpg (http://user.xmission.com/~red/torque.jpg)
Instruction sheet says 25-30 FT-lbs on the adapter "bolt" (click the link).
Cheers,
Red
QuoteInstruction sheet says 25-30 FT-lbs on the adapter "bolt" (click the link).
Thanks Red, just what i was looking for! :good2:
Quotetwist on the filter until the gasket makes contact. Then turn 3/4 of a revolution more.
Thanks Mark... Now what els can be twisted with engine oil hmm.... ?? :dash2:
I missed that you were looking for the torque of the adapter, not the filter... :dash2: :dash2: :dash2:
Quote from: FJmonkey on September 22, 2013, 10:25:51 AM
I missed that you were looking for the torque of the adapter, not the filter... :dash2: :dash2: :dash2:
No worries mate :i_am_so_happy:
Good to know how much to twist it too :rofl2:
Oh... one other thing to.. What tyre pressure do you guys run? 17" Front and 17" back...
34 front 36 rear, Conti Motions.
Quote from: FJmonkey on September 22, 2013, 01:34:10 PM
34 front 36 rear, Conti Motions.
Thanks Mark!
Will be doing some simple maintenance on the bike to morrow morning before my testride to my new place of employment. Need to know how long the commute will take, and will be using the bike until it gets too cold...
Cheers